Shopping Cart
(Your shopping cart is empty)

TPMS Links

Find TPMS by Manufacturers

Wholesale & Training








Online Payment Service
Home > TPMS Reset and Relearn > Rolls Royce TPMS Reset - Relearn
BMW-1

Inflate all tires to pressure indicated on tire placard.

If equipped with iDrive:

1. Turn ignition to ON position (engine off).

2. Press iDrive controller to use ā€œiā€ menu.

3. Select SETTINGS, press iDrive controller.

4. Select CAR/TIRES, press iDrive controller.

5. You may need to switch to the top field, select TIRES:RDC, and press iDrive controller.

6. Start engine.

7. Select CONFIRM TIRE PRESSURE, press iDrive controller.

8. Vehicle must be driven to complete relearn.

If not equipped with iDrive:

1. Start engine.

2. Hold turn signal lever in the up or down position until TPMS telltale and RESET are displayed.

3. Press button at end of turn signal lever.

4. Press and hold button at end of turn signal lever until a check appears after RESET.

5. Vehicle must be driven to complete relearn.

If not equipped with iDrive (for some models):

1. Ensure all tires are inflated to the pressure listed on the placard.

2. Start engine.

3. Hold down the TPMS Reset button (located under the hazard button or in front of the gear selector) until the TPMS light in the gauge cluster illuminates. Button may use initials RDE on some models.

4. Vehicle must be driven for up to 20 minutes above 20mph to complete relearn.


BMW-2


Inflate all tires to pressure indicated on tire placard.

If equipped with iDrive:

1. Turn ignition to ON position (engine off)

2. Select SETTINGS from iDrive menu.

3. Select VEHICLE

4. Select TPM

5. Select RESET

If not equipped with iDrive:

1. Turn ignition to ON position (engine off)

2. Hold down TIRE PRESSURE WARNING or RDC button (located on instrument panel) until TPMS telltale is illuminated.

3. Vehicle must be driven to complete relearn.