Shopping Cart
(Your shopping cart is empty)

TPMS Links

Find TPMS by Manufacturers

Wholesale & Training








Online Payment Service
Home > TPMS Reset and Relearn > Audi TPMS Reset - Relearn
Audi TPMS Relearn

AU-1

1. Inflate all tires to pressure listed on tire placard.

2. Hold down RESET button (on end of wiper lever) until DISPLAY TYPE is displayed.

3. Press button on end of wiper lever to select SET.

4. Press RESET button.

5. Press button on end of wiper lever to select TIRE PRESSURE.

6. Press RESET button.

7. Press button on end of wiper lever to select WHEEL CHANGE (select STORE PRESSURES if resetting air pressure).

8. Press RESET button. Relearn can take 20 minutes to complete.

AU-2

1. Inflate all tires to pressure listed on tire placard.

2. Press CAR function button.

3. Select TIRE PRESSURE MONITORING.

4. Select WHEEL CHANGE (select STORE CURRENT TIRE PRESSURES if resetting tire pressures).

5. Relearn can take 20 minutes to complete.

AU-3

1. Inflate all tires to pressure listed on tire placard.

2. Press CAR function button.

3. Select TIRE PRESSURE MONITORING.

4. Select INITIALIZE WHEELS (select STORE CURRENT TIRE PRESSURES if resetting tire pressures).

5. Relearn can take 20 minutes to complete.

AU-4

1. Inflate all tires to pressure indicated on tire placard.

2. Press MENU knob on center console to access the start menu.

3. Rotate MENU knob to position arrow by SET.

4. Press MENU knob.

5. Move arrow to TIRE PRESSURE.

6. Press MENU knob.

7. Move arrow to STORE PRESSURES.

8. Press MENU knob, a check mark will appear to signal relearn completion.

9. Exit out of tire menu. Vehicle will need to be driven several minutes to complete relearn process.

AU-5

1. Infalte all tires to pressure indicated on tire placard.

2. Turn ignition to ON position. (engine off)

3. Enter tire pressure mode.

4. Press media control, located on center console.

5. Let vehicle sit for 20 minutes.

6. After 20 minutes, vehicle must be driven above 25 mph for 10 minutes.